LiTime 14.6V 10A Charger for 12V LiFePO4 Lithium Battery

LiTime charger for 14.6 V and 10 A for LiFePO4 lithium batteries with a nominal value of 12.8 V. The charge proceeds in three stages: first activation, then stable 10 A, and towards the end the voltage remains constant and the current gradually drops to zero. This mode does not overheat the cells and brings the battery to 100% capacity.

The device is able to activate a battery that has been disconnected by the BMS due to deep discharge or tripping of the protection. If an ordinary charger simply does not see such a battery, it applies voltage forcibly and returns it to work.

The status can be seen by the indicator: red lights up during charging, green after completion, green flashes in standby mode, red flashes when an error or protection is triggered.

The built-in fan dissipates heat. There is protection against overheating, reverse polarity, short circuit and overvoltage at the output.

The charging time is approximately as follows: 20 A·h in 2 hours, 50 A·h in 5, 100 A·h in 10. The set includes an AC cable, a DC cable, a cable with an Anderson connector and M8 terminals, and an instruction manual.