Built-in lithium charger LiTime 12 V 10 A, waterproof IP65
Waterproof charger for 14.6 V and 10 A with IP65 class. The housing is designed to work in rain and splash, so it is placed in boats, campers and in open areas, where a conventional charger does not live long. The dimensions are 208 × 91 × 53 mm, it is attached to the surface with screws. Read more →
10%
Discount coupon from the manufacturer
Works on the "Buy from manufacturer" button. This coupon does not apply to AliExpress.
Enter the code in the cart on the manufacturer's website - the discount will be applied to the order.
- 5-year warranty. Long-lasting protection, worry-free use.
- Without VAT Additional value added tax is not charged.
- Free delivery Fast local delivery
Waterproof charger for 14.6 V and 10 A with IP65 class. The housing is designed to work in rain and splash, so it is placed in boats, campers and in open areas, where a conventional charger does not live long. The dimensions are 208 × 91 × 53 mm, it is attached to the surface with screws.
The efficiency is not lower than 90%. The charge proceeds in three stages: first a short precharge for activation, then a stable 10 A, and at the end the voltage is fixed and the current gradually decreases to zero.
The device is able to revive a battery that has been disconnected by the BMS after a deep discharge.
Protection covers reverse polarity, over temperature, over voltage, over and under current and output short circuit. The status is shown by the LED: red during charging, green when complete, flashing red when there is an error.
Estimated charge time: 50 A·h about 5 hours, 100 A·h about 10.
The kit includes an AC cable, a DC cable, a waterproof connector with a cap, four screws and an instruction manual.
| Producer | LiTime |
| Article | L12V10A-BCHA-WP-Y-DE |
| Type | Charger for LiFePO4, waterproof |
| Charge voltage | 14.6 V |
| Current | 10 A |
| Input voltage | 100–240 V, 50/60 Hz |
| Compatibility | LiFePO4 batteries 12 V (12.8 V) |
| Charge mode | 3 stages: precharge, constant current, constant voltage |
| efficiency | at least 90% |
| Activation after BMS | Yes |
| Indication | LED: charge / charged / standby / error |
| Protection | reverse polarity, overheating, overvoltage, output overvoltage and undervoltage, short circuit |
| Charging time | 50 A·h — about 5 h, 100 A·h — about 10 h |
| Connectors | waterproof connector, ring terminals M8 |
| Protection class | IP65 |
| Dimensions (L×W×H) | 208 × 91 × 53 mm |
| Complete set | AC cable, DC cable, connector, screws ×4, manual |
| Certificates | CE, FCC, RoHS |
![LiTime [Ukraine] LiFePO4 12V 100Ah battery with Bluetooth monitor - 100A BMS](/images/litime/rv-lifepo4-akumuliator-12v-100ah-bluetooth-pid-sydinnia-h190-ukraina/01.webp)
