LiTime 58.4V 10A LiFePO4 charger for 51.2V LiFePO4 battery, with intelligent 0V charging function
- 5-year warranty. Long-lasting protection, worry-free use.
- Without VAT Additional value added tax is not charged.
- Free delivery Fast local delivery
58.4 V 10 A charger for LiFePO4 lithium batteries rated at 48 V, i.e. 51.2 V. The output voltage corresponds to 16 cells in series.
The charge proceeds in three stages: pre-charge, constant 10 A and final phase with a constant voltage. The unit is designed for long-term operation, so 100 Ah will charge for about 10 hours. If you need faster, you should take a more powerful model.
The device activates a battery that the BMS has disconnected due to deep discharge. The operating temperature range of the charge is from -20 to 40 °C, so in winter in a cold room it works, but more slowly.
The case has a switch, mounting holes and a fan. The panel shows the status: power, charge, full charge, error or waiting. A separate LED duplicates these states.
Four protections are claimed: overheating, reverse polarity, short circuit and overvoltage. Connection through ring terminals.
| Producer | LiTime |
| Article | L48V10A-BCHA-Y-DE |
| Type | Charger for LiFePO4 |
| Charge voltage | 58.4 V |
| Current | 10 A |
| Compatibility | LiFePO4 batteries 48 V (51.2 V) |
| Charge mode | 3 stages: precharge, constant current, constant voltage |
| Reactivation 0 V | Yes |
| Operating temperature of the charge | -20...40 °C |
| Indication | status bar and LED: charge / charged / standby / error |
| Protection | overheating, reverse polarity, short circuit, overvoltage |
| Cooling | built-in fan |
| Assembling | mounting holes, switch |
| Terminal type | circular |
| Certificates | CE, FCC, RoHS |