Charger LiTime 14.6V 20A for lithium batteries
- 5-year warranty. Long-lasting protection, worry-free use.
- Without VAT Additional value added tax is not charged.
- Free delivery Fast local delivery
LiTime 14.6V 20A charger for 12.8V LiFePO4 batteries. Does not work with lead-acid batteries.
A full charge of 100 A·h takes about 5 hours, 50 A·h takes about 2.5 hours. Efficiency over 85%, the fan cools the case during long-term operation.
The charge proceeds in three stages: first, a pre-charge for activation, then a stable 20 A, and at the end the voltage remains constant. If the battery does not show signs of life after a deep discharge, the device applies voltage forcibly and starts it.
The indicator shows the state of charge: red during operation, green when finished, flashing red when there is an error. Protection covers reverse polarity, overheat, overvoltage, undervoltage, overload and output short circuit.
The dimensions are 206.5 × 90.4 × 63.8 mm. Anderson connector for 50 A. The set includes Anderson cable 25 cm, DC cable 120 cm, AC cable 120 cm and instructions.
| Producer | LiTime |
| Article | L12V20A-BCHA-X-UA |
| Type | Charger for LiFePO4 |
| Charge voltage | 14.6 V |
| Current | 20 A |
| Compatibility | only LiFePO4 12V (12.8V) batteries |
| Charge mode | 3 stages: precharge, constant current, constant voltage |
| efficiency | over 85% |
| Activation after BMS | Yes |
| Indication | LED: charge / charged / standby / error |
| Protection | reverse polarity, overheating, overvoltage, undervoltage, overload, short circuit |
| Cooling | built-in fan |
| Charging time | 50 A·h — 2.5 h, 100 A·h — 5 h |
| Connector | Anderson 50 A |
| Dimensions (L×W×H) | 206.5 × 90.4 × 63.8 mm |
| Complete set | Anderson cable 25 cm, DC cable 120 cm, AC cable 120 cm, manual |
| Certificates | CE, FCC, RoHS |