LiFePO4 batteries and inverters

Nothing found

All

DATOUBOSS 2000W Pure Sine Wave Inverter 24V to 230V AC Power Converter 4000W Peak Power with 1 EU Plug LCD Screen 1 Type-C Port and 1 USB Port for Home Appliances RV Truck

139,99 EUR In stock SKU: SP-DT-PSW2000W-24V-A-EU
DATOUBOSS PSW2000 inverter for 24V mains outputs 230V AC with pure sine wave. 2000W rated, 4000W peak, half the battery current of the 12V version. Read more →
10%
Discount coupon from the manufacturer Works on the "Buy from manufacturer" button. This coupon does not apply to AliExpress. Enter the code in the cart on the manufacturer's website - the discount will be applied to the order.
  • 5-year warranty. Long-lasting protection, worry-free use.
  • Without VAT Additional value added tax is not charged.
  • Free delivery Fast local delivery

DATOUBOSS PSW2000 inverter for 24V mains outputs 230V AC with pure sine wave. 2000W rated, 4000W peak, half the battery current of the 12V version.

The model is designed for vehicles with a 24 V on-board network: trucks, buses, special vehicles and assemblies with two batteries. Input range 20-30 V, over-discharge protection at 20.0 ±0.3 V, over-voltage protection at 30.0 ±0.3 V.

At the same power, the inverter consumes about 100 A instead of 185 A in the 12-volt version: less heating of the wiring and losses in the cable. It will not start from 12 V, because the discharge protection threshold is at 20 V.

Output: EU connector, USB 2.1 A, Type-C up to 20 W, ground terminal. A clean sine wave with up to 3% distortion and up to 95% efficiency powers compressor refrigerators, pumps and laptop chargers.

Dimensions 360×173×76 mm, weight 4.0 kg, two fans. Overload protection at 130% of the nominal value, standby consumption of about 0.7 A.

Producer DATOUBOSS
Article SP-DT-PSW2000W-24V-A-EU
Type Pure Sine Wave Inverter (DC/AC)
Model PSW2000
Power 2000 W (continuous)
Peak power 4000 W
Input voltage 24 V (20-30 V range)
Input current (max.) 100 A
Protection against discharge 20.0 ±0.3 V
Overvoltage protection 30.0 ±0.3 V
Recovery after subsidence 25.5 ±0.3 V
Output voltage 220 V ±10 % (declared 230 V)
Output frequency 50 / 60 Hz ±1 Hz
The shape of the output current Pure sine wave, THD ≤3%
efficiency up to 95%
No-load current 0.7 A
Display LCD: input and output voltage, frequency, power, battery charge
Ports 1 × EU socket, 1 × USB 2.1A, 1 × Type-C 20W
Protection Overvoltage, sag, overload (≤130%), overheating, short circuit
Junction Galvanic between input and output
Grounding Separate screw terminal
Cooling 2 fans
Kit Remote control, cables with tips, terminal caps
Dimensions 360 × 173 × 76 mm
Weight 4.0 kg
Certification CE, FCC, RoHS, TÜV Rheinland